Be Aware of the Risks of Driving on Bald Tyres!

The bald tyres are ignored by many people as they don’t want to bear the expense of a new tyre. They rather prefer to drive on the bald tyres. But, they are unaware of the fact that this is a huge mistake that may cost them their life later. Driving with bald tyres may lead to many dangers on the road.

Driving on bald tyres may lead to tyre failure, control loss and unnecessary repair bill. Thus, you must prevent unwanted risks and expenses by changing bald tyres and fitting with new Tyres hove immediately.

Excess heat buildup

A huge amount of friction between the road and tyre surface is produced while driving. Heat is produced by such friction. Your tyre may get blown out by the excessive amount of friction leading to control loss of the vehicle at a fast pace. More heat levels can be withstood by the tyre materials. But, the tyres turn too unsafe when the temperature of the surface rises to a specific limit.

The tyres get cooled down with the help of the tread as it allows airflow through the grooves. Grooves are absent in bald tyres as the tread gets worn out. So, the heat can dangerously rise to unsafe limits.

Less Grip on snowy or Icy Road 

It can be very dangerous to drive on the icy or snowy road if you don’t have proper snow tyres, which have deeper and wider grooves as compared to usual tyres. The winter tyres are made of sipes, which are thin and small channels or grooves cutting into the tread edges. By offering more surface area to get a hold on the road, these enhance the traction.

If sipes are absent in snowy tyres, you must visit a garage with your vehicle so that some extra edges can be added. You must remember that both tread and sipes get worn out. If your car has both sipes and treads in good condition, you can be saved from slipping danger on snowy roads. You must avoid driving on bald tyres in the snow.

Inefficient Brakes

Irrespective of the speed limit, a vehicle’s brake system is expected to work well while driving. But, traction is not offered by brakes but tyres. So, your car’s capacity to offer traction and stop the vehicle while driving on the smooth road free of debris, dirt and sand is reduced if your vehicle has bald tyres. Thus, inefficient braking can lead to an increase in unwanted repair charges and accidents.

Sudden blowouts

Blowout chances may get minimised by treads when driving. Blowouts at fast speed are fatal. All punctures can’t be prevented by treads. But, as compared to bald tyres, a tyre with good tread can resist punctures well due to sharp objects.   

Air pressure Loss

The bald tyres deflate faster as compared to tyre with adequate depth of tread. Bald and low-tread deflate sooner even if you inflate your tyres with adequate pressure. Bald tyres that are deflated are riskier to drive on. Even in dry conditions, they can’t get hold of the road efficiently.

Thus, the steering gets tougher. While making sudden halts, the car may skid. The left out tread may wear out fast due to under-inflation. You need to buy tyres and get the replacement done as fast as possible. 

More Hydroplaning Risk

When the water layer comes between the road and the tyre surface, hydroplaning occurs. Deep grooves are present in patterns of modern tyre tread to let the water escape out of the tyre. This enables the tyres to hold a strong grip on the ground surface in moist conditions.

The grooves get shallower as time makes the tread wear out gradually. Thus, the tyre loses its capacity to channel the water out from under it. The hydroplaning risk increases with increase as the grooves become shallower. 


Thus, don’t ignore your bald tyres and get them replaced as soon as you can.


Wajazali is a passionate writer and blogger who has been writing about the latest developments in the field of technology for over 3 years. His articles are published on, which he administers as well. Wajazali is also involved with various other projects to help people learn how to manage their own online marketing campaigns.
Back to top button
%d bloggers like this: